Honda CBR125R, Руководство пользователя

Страница: 20 / 430

GENERAL INFORMATION
1-16
LUBRICATION & SEAL POINTS
ENGINE
MATERIAL LOCATION REMARKS
Liquid sealant (Three
bond 1215 or equivalent) Left crankcase mating surface See page 12-22
Alternator/CKP sensor wire grommet sealing surface
Engine oil Oil pump rotor entire surface
Water pump shaft outer surface
Starter clutch rolling surface
Starter reduction gear shaft outer surface
Right crankshaft outer surface
Left crankshaft starter driven gear sliding surface
Cam chain entire surface
Cylinder inner surface
Piston outer surface and piston ring entire surface
Clutch disc entire surface
Each oil seal lips
Each bearing rotating area
Each gear teeth
Each O-ring
Multi-purpose grease Each oil seal lips (clutch lifter arm, gearshift spindle,
countershaft)
Molybdenum oil solution
(a mixture of 1/2 engine
oil and 1/2 molybdenum
disulfide grease) Valve stem sliding surface and stem end
Piston pin outer surface
Clutch outer guide outer surface
Clutch lifter arm sliding surface and arm end
Shift drum journal outer surface
Gearshift spindle shaft outer surface
Balancer driven gear inner surface
Camshaft lobes
Rocker arm shaft outer surface
Clutch lifter arm hole inner surface (right crankcase
cover)
Shift fork shaft outer surface
M5, M6, C1, C2, C3, C4 gear rotating surface
M5, M6, C1, C2 gear bushing entire surface
M3/4, C5, C6 gear shift fork grooves
Locking agent Right crankcase cover plate bolt threads Coating width:
6.5
±
1.0 mm from tip
Mainshaft bearing setting plate bolt threads Coating width:
6.5
±
1.0 mm from tip