Honda CBR125R, Руководство пользователя

Страница: 235 / 430

CLUTCH/GEARSHIFT LINKAGE
10-11
Remove the clutch outer guide and washer from the
mainshaft.
INSPECTION
CLUTCH LIFTER BEARING
Turn the inner race of the lifter plate bearing with
your finger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the lifter plate.
Replace the bearing if the inner race does not turn
smoothly, quietly, or if the outer race fits loosely in
the lifter plate.
CLUTCH SPRING
Replace the clutch
springs as a set.
Check the clutch spring for fatigue or damage.
Measure the free length of the clutch spring.
CLUTCH CENTER
Check the grooves of the clutch center for nicks,
indentations or abnormal wear made by the clutch
plates.
CLUTCH OUTER GUIDE WASHER
BEARING
SERVICE LIMIT: 38.3 mm (1.51 in)
CLUTCH CENTER
GROOVE