Honda CBR125R, Руководство пользователя

Страница: 220 / 430

CYLINDER/PISTON
9-8
Insert the piston ring into the bottom of the cylinder
squarely using the piston crown.
Measure the piston ring end gap.
CONNECTING ROD
Measure the connecting rod small end I.D.
Calculate the connecting rod-to-piston pin clear-
ance.
CAM CHAIN TENSIONER LIDFTER
Check the lifter operation:
– The cam chain tensioner lifter shaft should not
go into the cam chain tensioner lifter body when
it is pushed.
– When it is turned clockwise with a tensioner
stopper, the cam chain tensioner lifter shaft
should be pulled into the cam chain tensioner
lifter body. The cam chain tensioner lifter shaft
should spring out of the cam chain tensioner
lifter body as soon as the tensioner stopper is
released.
STUD BOLT REPLACEMENT
Thread two nuts onto the stud and tighten them
together, and use a wrench on them to turn the stud
bolt out.
Install new stud bolts into the crankcase as shown.
After installing the stud bolts, check that the length
from the bolt head to the crankcase surface is within
specification.
SERVICE LIMITS:
Top: 0.40 mm (0.016 in)
Second: 0.70 mm (0.028 in)
Oil:
1.10 mm (0.043 in)
PISTON RING
SERVICE LIMIT: 13.06 mm (0.514 in)
SERVICE LIMIT: 0.10 mm (0.004 in)
CONNECTING ROD
TOOL:
Tensioner stopper
070MG-0010100
TENSIONER LIFTER TENSIONER STOPPER
168.5
±
1.0 mm
(6.63
±
0.04 in)