HCA Series Installation Manual
Page 25 of 58
V2.15
D51, D53, D57
Amber
These LEDs are lit when the corresponding programmable relays are
activated.
4. Control Panel Operations
All non-programming operations and system behaviors are described in this section. See section 5 for
initial setup and control panel programming.
The HCA series control panel has 15 keys as shown in the diagram below that are used to operate and
program the panel. Some of the keys have additional functions, which become active depending on the
menu screen being displayed at the time.
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
Esc
0
Ack
RESET
*
No
Yes
Backward
Forward
#
Next
Enter
1
abc
2
def
3
4
ghi
Silence
NAMES
Figure 4 - HCA Control Panel Keypad
Important Note: If the system is left idle in a menu without any activity for 5 minutes, the system
will automatically exit the menu.
4.1 LCD Display Screens
All status and operations display screens for the HCA panel are described below.
4.1.1 Initial Display Screen after System Initialization and Panel Revision
The HCA control panel will only take a few seconds to initialize after the system is powered on. The first
screen to be displayed will be the panel software revision which is displayed for about 10 seconds before
the panel will display the system status idle screen. The software revision can also be displayed at any
time by pressing the ACK key twice when the panel is idle. Pressing the ESC key with the software revision
screen active will bring the panel back to the system status idle screen.
Ver X.YY
Date: 12/06/2012
The X is the version number and the YY is the revision number.
