HCA Series Installation Manual
Page 51 of 58
V2.15
You may enter blanks or spaces in the account number by pressing the Silence key for the 2 most
significant digits. The ESC key will back the cursor left one position until you reach the left most digit and
then it will escape out of the account edit menu.
Account Number:
123456
Enter the account number you want to use for reporting.
5.6.4.2 Reporting Format
The DACT supports both Contact ID and SIA reporting formats. Use the up or down arrows to scroll
through the reporting format selection and press the Enter key when the format you want is visible in the
display screen.
Reporting Format
CID
Select the reporting format desired for this account.
5.6.4.3 Alarm Reporting Filter
The alarm reporting filter determines if this account will report alarms and alarm restores to the central
station.
Report Alarms
(Y/N): Y
Select Y if you want alarms reported to this account. Select N
if you do not want alarms reported.
5.6.4.4 Supervisory Reporting Filter
The supervisory reporting filter determines if this account will report supervisories and supervisory
restores to the central station.
Report Suprvisry
(Y/N): Y
Select Y if you want supervisories reported to this account.
Select N if you do not want supervisories reported.
5.6.4.5 Trouble Reporting Filter
The trouble reporting filter determines if this account will report trouble and trouble restore events to the
central station.
Report Trouble
(Y/N): Y
Select Y if you want troubles reported to this account. Select N
if you do not want troubles reported.
5.6.4.6 Tests Reporting Filter
The tests reporting filter determines if this account will report tests and test restore events to the central
station.
Report Tests
(Y/N): Y
Select Y if you want test events reported to this account. Select
N if you do not want test events reported.
