Step 2-3: Install of Front Lower Frames
Parts List
Lower Front Frames
3 X 8mm Cap Head Bolts (4)
Attach the Lower Frames
to the Frame Support
using 3 X 8mm Cap
Head Bolts. By
Examining the Frame
Piece, you will notice
that there are 3 holes for
attaching to the Frames
to the Frame Support.Use
only the top two holes
(Marked in RED) at this point, as the last hole will be used
for the right-angle frame pieces to be installed later.
Step 2-4: Install of Rear Lower Frames
Parts List
Lower Rear Frames (2)
Cross-Spacer 12mm (6
)
Cross-Member 26mm (3)
3 X 22 mm Cap Head Bolts (6)
Loctite the 3 X 22mm Bolt and place it through the
hole (Marked in RED) in the Lower frame piece.
Place the 12mm Cross-spacer on the other side.
Place a 26mm Cross-member between the frames
behind the corresponding hole. Attach the frame
piece and finish installing the remaining bolts and
cross-members in the same manner. Note: Repeat
process on other side
