Step 26: Canopy Mounting
Parts List
Fiberglass Canopy (1)
Canopy Cross-members
Long (2)
Short (2)
Mount the Stand-offs to the main frames using 3 X6 mm Cap
Head Bolts. (The standoffs are cross-members with a flare at
one end). After the Stand-offs are mounted to the frames, place
the canopy in position with the upper opening surrounding the
swash plate. The bottom of the canopy should appear level. Now
that canopy is located in a position that you deem appropriate,
place a mark on the outside of the canopy that corresponds to the
location of the stand-offs on the frames. This is accomplished by
shining a flashlight inside the canopy so you can see where the
stand-offs are touching the inside canopy walls. Finally, after the
marks are made on the canopy, drill a 1/4 hole at each mark and
insert the canopy rubber grommets into the drilled holes. Attach
the canopy to the stand-offs using 3mm x 10mm Cap Screws.
