1. Heavy Duty Frame Construction: Quick 30 frames are made of the highest Quality
2000 series Aluminum. These frames are not only rigid but will provide excellent
vibration absorption.
2. One-Way Hex Start Shaft System: The one-way bearing allows the engine to
continue to run after the starter motor has been stopped.
3. Ball Bearing Idler Pulley: The ball bearing idler pulley provides smooth consistent
power to the tail by not allowing the belt to jump teeth.
4. Belt driven Tail: Belt Driven tail is not only a reliable way to drive a tail, but is also
very smooth and is low maintenance feature.
5. High Quality Ball Bearings: Quick 30 Pro offers ball bearings on all moving parts
unlike other machines.
6. EMS Collective System: The EMS Collective design allows ease of setup with fewer
moving parts. EMS constitutes overall design simplicty and represents the future of
helicopter technology.
7. Heavy-Duty Clutch System: Based on the same design as our famous heavy-duty
clutch upgrade that fits most popular machines, this clutch will give many years of
problem free operation.
8. Control Linkages: The control linkages that are provided with the Quick 30 Kit are
high quality 2.3mm stainless steel rods and the rod ends are made of a high quality
liquid Delrin.
9. Independent Blade Axle Design: The dual blade axle construction is pinned
above and below the centerline of the of the main blade grips. This rotor head design
far exceeds the quality of any rotor head on the market today.
10. Advanced Airfoil Flybar Paddles: These paddles will provide the best both kind of
flight characteristics 3D & Sport flying. Not only do they provide smooth forward flight,
they also provide quick response upon demand.
11. Rearward facing Engine Design: This design provides easy access to the glow
plug and is adventageous for easy engine removal.
12. This machine utilizes high quality, Machined parts which are also bright-dipped and
anodized for metal protection and beautiful appearance.
Quick 30 Features
