Step 1: Upper Frame & Bearing Block Assembly
Read the entire manual first to get an idea of the machine's makeup, each step will
contain a parts list, a text description of the assembly, and pictures to illustrate the
construction. If there are any questions or concerns call or E-mail us and will be happy
help. Also, if possible, print this manual in color because we have some things color-coded.
It is also recommended that you degrease your bolts with acetone or rubbing alcohol and use
blue (242) locktite. The alcohol/acetone helps the locktite stick.
Main Shaft
Bearing Blocks (2)
Clutch Bell
Bearing Block (1)
Counter Gear
Assm. &
BRG. Block (1)
Parts List
5 X 10 X 4mm
Bearings Flanged (2)
3 X 8mm
Cap Head Bolts (20)
Upper Frames (2)
1 - Locate both upper frames install the 5 X 10 X 4mm Bearings
with flanged portion of the bearing facing toward inside
(Hole ID Yellow).
2 - It is necessary that the ridge portion of the Main shaft bearing
blocks face each other on all installation. The ridge is identified
as the side which only a portion of the bearing can be viewed.
3 - Begin installing the main shaft bearing blocks on half of the
frame (RED). Next Install the Clutch bell bearing block with the
smaller inside hole facing up (BLUE). Now install the Counter
gear Assm. w/Brg. block. (GREEN)
Note: If Bearings are a tight fit, use round file or fine sand paper rolled in to a tube
and lightly sand until proper fit is acquired.
