Step 21: Tail Fin Installation
Parts List
Horizontal & Vertical Fins (1)
Horizontal Fin Mount (1)
Vertical Fin Mount (1)
Installing fin set: attach the Horizontal Fin to the Fin
Mount by using 2- 3 X 8mm Cap Head Bolts. Attach
the vertical fin to the mount using 3 X 6mm Cap Head
Screws & the Vertical Fin Mount.
3 X 8mm Cap Head Bolts (2)
3 X 6mm Cap Head Bolts (2)
Step 22: Swashplate & Anti-Rotation Guide Installation
Parts List
120 degree Swashplate (1)
Anti-Rotation Guide A&B (1)
3 X 6mm Cap Head Bolts (2)
Installing the swash plate and the anti-rotation
guide assembly: Slide the swash plate over
the main shaft and point the swash plate
anti-rotation pin towards the rear. Assemble
the two-piece anti-rotation guide using
2- 3 X 6mm Cap Head Bolts. Next, slide
the pin from swash into the anti-rotation
guide slot and install the anti-rotation guide
base between the frames using (4) 3 X 6mm
Cap Head bolts.
