HNC Electric HRS Series Скачать руководство пользователя страница 5

Страница: 5 / 41

- 5 -

Foreword

Thank you for using HRS Series intelligent AC motor soft starter produced by HNC ELECTRIC LIMITED.

HRS Series soft starter is a intelligent AC motor soft starter with international leading technology newly developed by HNC

ELECTRIC LIMITED. HRS Series soft starter uses power electronic technology, microprocessor technology and modern

control theory technology, and has a new type of starting equipment with the international advanced level. This product

can effectively limit the starting current of asynchronous motors when starting, and can be widely used in heavy-duty

equipment such as fans, water pumps, conveyors, and compressors. It is an ideal replacement product for star/delta

conversion, auto-coupling step-down, magnetic control step-down and other step-down starting equipment.

The HRS Series soft starter not only has the same excellent performance as the international high-end soft starter, but

also combines the application characteristics to further strengthen the reliability of the product, the adaptability of the

environment, and the humanized and industrialized design, which can meet the requirements of various applications.

Содержание HRS Series










































Результаты поиска

Содержание HRS Series

Отзывы:

Похожие инструкции для HRS Series

Бренды по названию

Популярные бренды

HNC Electric HRS Series, Руководство по эксплуатации

Результаты поиска

Содержание HRS Series

Отзывы:

Похожие инструкции для HRS Series

Бренды по названию

Популярные бренды