HNC Electric HRS Series Скачать руководство пользователя страница 6

Страница: 6 / 41

- 6 -

Excellent Performance

●

Multi-start mode:

The voltage ramp starting mode can obtain the max. output torque, the constant current soft starting mode can obtain the

max. limited starting current, and the sudden jump starting mode can be applied to loads with large static friction during

starting.

●

High reliability:

There are high-performance microprocessors for digital processing of the signals in the control system, avoiding excessive

adjustments of the previous analog circuits, thereby obtaining excellent accuracy and execution speed.

●

High performance:

Programmable delay start mode, programmable interlock control.

There is no phase sequence requirement for input power.

The starting time and stopping time can be modified digitally.

The dynamic fault memory function makes it easy to find the cause of the fault and can record up to ten faults.

●Full dynamic control monitoring starter of field-bus, easy to network:

The bus type is Modbus.

●With multiple protection functions:

Protects against over-voltage, under-voltage, overheating, phase loss, and motor overload.

●Perfect humanized design:

Harmony of beautiful appearance and reasonable structure.

Harmony of perfect functions and easy operation.

Harmony of firmness, reliability and compact structure.

Artistic design of industrial products excellence.

●

Reliable quality assurance:

Using computer simulation design.

STM patch production process.

Excellent electromagnetic compatibility performance.

High temperature aging and vibration test of the entire machine before leaving the factory.

●Fast and thoughtful after-sales service:

Reliable performance and quality lay the foundation for quality service.

Provide excellent and complete equipment design solutions.

Timely and thoughtful use consultation.

Continuously improve product performance based on user

’s opinion.

Содержание HRS Series










































Результаты поиска

Содержание HRS Series

Отзывы:

Похожие инструкции для HRS Series

Бренды по названию

Популярные бренды

HNC Electric HRS Series, Руководство по эксплуатации

Результаты поиска

Содержание HRS Series

Отзывы:

Похожие инструкции для HRS Series

Бренды по названию

Популярные бренды