HKC SW-1070, Руководство по установке, Страница: 74 / 122

Example: Programming the outputs on the Panel.
•
Go to Outputs Menu and select YES.
•
Panel Outputs will be on the display. Again, press YES.
You should see 01 Pre Alrm + on the display. Press YES or scroll to another output and then press YES.
In this example Pre Alrm (shorthand for Pre-Alarm) will flash on the display.
You can now scroll and select an output type from the list on the next page.
Once you have selected your output type you will be prompted to select between negative or positive polarity.
•
•
•
•
7 Outputs Menu
3 PSU Outputs 03 Strobe -ve
6 Timers Menu
1 Panel Outputs 01 Pre Alarm +ve
2 Expander Outputs 02 Alarm +ve 8 System Options
4 Output Card Outputs
6 User Outputs
04 Internal Bell -ve
5 Output Groups 05 External Bell -ve
Outputs Menu - Continued
Panel Outputs is used to select the output type you want for
outputs 1 to 5. See next page for the full range of output
types.
Please note that each 10-Zone Expander has 2 outputs
(
Expander Outputs ), each power supply has 2 outputs
( PSU Outputs ) and each Output Card has 8 outputs ( OPC
Outputs ).
Note: Output Groups will be dealt with on page 78 & 79
User Outputs will be dealt with on page 79
71 PANEL OUTPUTS
73 PSU OUTPUTS
72 EXPANDER OUTPUTS
74 O/P CARD OUTPUTS
75 OUTPUT GROUPS
76 USER OUTPUTS
74
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
!