HKC SW-1070, Руководство по установке, Страница: 16 / 122

RF-Contact/Sensor - Continued
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)
16
1 Add & ID RF Devices
1 Add & ID RF Devices
1 Add & ID RF Devices
1 Add & ID RF Devices
1 Add & ID RF Devices
1 Add & ID RF Devices
1 RF Zone Opts
1 Locate: RF Zone
1 Remove: RF Zone
Z01 Zone 1
Z01 Zone 1
Z01 Zone 1
2 RF Keyfob Opts
2 Locate: RF Keyfob
2 Remove: RF Keyfob
Z02 Zone 2
Z02 Zone 2
Z02 Zone 2
2 Locate RF Devices
2 Locate RF Devices
2 Locate RF Devices
2 Locate RF Devices
2 Locate RF Devices
2 Locate RF Devices
3 Remove RF Devices
3 Remove RF Devices
3 Remove RF Devices
3 Remove RF Devices
3 Remove RF Devices
3 Remove RF Devices
4 RF Device Options
4 RF Device Options
4 RF Device Options
4 RF Device Options
4 RF Device Options
4 RF Device Options
•
Go to the Devices Menu . Then RF Devs Menu . Next select the RF Device Options .
•
Go to the Devices Menu . Then RF Devs Menu . Next select the Locate RF Devices .
•
Go to the Devices Menu . Then RF Devs Menu . Next select the Remove RF Devices .
•
The RF-Cx or RF-CSx programmable options can be accessed as follows;
•
The RF-Cx or RF-CSx can be located as follows;
•
The RF-Cx or RF-CSx can be removed as follows;
•
From there go to RF Zone Opts and then select the RF-Cx or RF-CSx number in question.
•
You can now turn off the devices’ magnetic contacts (otherwise known as reed switches).
•
Selecting Reeds ON NO .turns them off.
•
The other option is Mon Sup (Monitored Supervisory signal) is defaulted to YES. When the device is “lost” for
a prolonged period of time, a supervisory alarm is flagged by the panel. This can be turned off by selecting NO.
However, we recommend that this feature is left as YES
•
From there go to Locate: RF Zone and then select the RF-Cx or RF-CSx number in question.
•
The LED on the RF-Cx or RF-CSx that you selected will flash on and off every second thus helping you to
locate it.
•
Also note, opening & closing the tamper switch on a device will locate and display said device at the keypad.
•
From there go to Remove: RF Zone and then select the RF-Cx or RF-CSx number you want removed. Press
YES to select this device for removal and press YES again to confirm removal.
2 Devices Menu
2 Devices Menu
2 Devices Menu
2 Wired Devices Menu
2 Wired Devices Menu
2 Wired Devices Menu
1 RF Devices Menu
1 RF Devices Menu
1 RF Devices Menu
1 Service Menu
1 Service Menu
1 Service Menu
3 Zone Menu
3 Zone Menu
3 Zone Menu