manualshive.com logo in svg

HKC SW-1070, Руководство по установке, Страница: 68 / 122

Поделиться
Скачать
HKC SW-1070 Скачать руководство пользователя страница 68

  620 Dbl.Nok Open

  629 Dbl.Nok Reset

  628 Bell Delay

  627 Soak Period

  626 Split Entry 

  625 Exit Time

  624 Entry Time

  623 Strobe Time

  622 External Bell

  621 Internal Bell

62 SYSTEM TIMERS

(Mins)
(Mins)
(Mins)
(Secs)
(Secs)
(Secs)
(Days)
(Mins)
(Mins)
(Secs)

This menu is used to program timers in the control panel. To 
edit a time select it using the 

PREV

 or 

NEXT

 keys then press 

YES

. Enter the new time to be used. The new time will then be 

programmed. Most of the timers are self explanatory but there 
are a two things to note.... 

 

           Note 1:

 

Split Entry

 time is an EN 50131-1 feature. If at the end of the 

entry time the system has not been unset it will only activate the internal siren 
and the 

Split Entry

 time starts. Then at the end of the 

Split Entry

 time, if the 

system still has not been unset, both internal and external sirens will activate 
and a message sent to the monitoring station (usually this message happens 
after a further 20 second delay - or 30 seconds in UK).

           Note 2:

 “

Dbl. Nok

” is shorthand for Double Knock

. 

Zones with the 

Double Knock feature need to be activated twice within the 

Dbl.Nok Reset

 

period before they are flagged. Or, they need to remain activated for the 
duration of the 

Dbl.Nok Open 

period before they are flagged

  633 Mains Flt Dly   (Mins)

  632 Fire Exit Delay (Secs.)

  631 Wks 2 Service (Weeks)

63 MISC. TIMERS

Wks 2 Service

 

menu is used to program the number of 

weeks between system services. When the

 

service period 

expires, 

Service Due

 ... 

Contact Engineer

 

 will be displayed, 

as a

 

prompt to the user, everytime the system 

is unset. 

Note that p

rogramming "00" disables this

 

feature

.

 

Fire Exit Dly;

 you can delay the effects of opening a fire exit 

door by selecting a delay period here (in seconds).

 

Mains Flt Dly

; 

During a power blackout, a mains fault will

only be re

p

orted to a Central Station if it

 

exceeds the mains 

fault delay period that is

 

programmed.

   

           

Note:

 Delays SMS and voice reporting also

64 BLOCK TIMERS

This is where you can adjust the Entry Time, Exit Time, 
Internal and External Siren Times for each block. 

A block is a 

semi-autonomous alarm system within the overall system.

 Timers Menu

61 SET DATE & TIME

Used to set the system date and time. The date follows the 
following format dd/mm/yy i.e. Day/ month /year and the time is 
in 24Hr format as follows hh:mm i.e. Hours : minutes.

  

Note:

 You will be prompted to key-in the time and date when you initially 

power-up your system

!

!

!

!

Default Eng. Code - 4567    Default User Code - 1111 (Irl) 1234 (UK)

68

Содержание SW-1070



























































































































Отзывы:

Нет отзывов