Hitachi SJ2002 Series, Инструкция по эксплуатации

Страница: 292 / 306

Parameter Settings for Keypad Entry
Appendix C
C–10
C042 Frequency arrival setting for
acceleration 0.0 0.0
C043 Arrival frequency setting for
deceleration 0.0 0.0
C044 PID deviation level setting 3.0 3.0
C052 PID FBV function high limit 100.0 100.0
C053 PID FBV function low limit 0.0 0.0
C071 Communication speed selection 06 04
C072 Node allocation 1. 1.
C074 Communication parity selection 00 00
C075 Communication stop bit selection 1 1
C076 Communication error select 02 02
C077 Communication erorr time-out 0.00 0.00
C078 Communication wait time 0. 0.
C081 O input span calibration 100.0 100.0
C082 OI input span calibration 100.0 100.0
C085 Thermistor input tuning 100.0 100.0
C086 [AM] terminal offset tuning 0.0 0.0
C091 Debug mode enable 00 00
C101 Up/Down memory mode
selection 00 00
C102 Reset selection 00 00
C141 Input A select for logic output 00 00
C142 Input B select for logic output 01 01
C143 Logic function select 00 00
C144 Terminal [11] ON delay 0.0 0.0
C145 Terminal [11] OFF delay 0.0 0.0
C146 Terminal [12] ON delay 0.0 0.0
C147 Terminal [12] OFF delay 0.0 0.0
C148 Output relay ON delay 0.0 0.0
C149 Output relay OFF delay 0.0 0.0
“C” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE(F)
(EU)
-FU
(USA)