Hitachi SJ2002 Series, Инструкция по эксплуатации

Страница: 166 / 306

Using Intelligent Input Terminals
Oper
ations
and Monitor
ing
4–24
Analog Input Current/Voltage Select
The [AT] terminal selects whether the inverter uses the voltage [O] or current [OI] input
terminals for external frequency control. When intelligent input [AT] is ON, you can set
the output frequency by applying a current input signal at [OI]-[L]. When the [AT] input
is OFF, you can apply a voltage input signal at [O]-[L] to set the output frequency. Note
that you must also set parameter A001 = 01 to enable the analog terminal set for control-
ling the inverter frequency.
Option
Code
Terminal
Symbol
Function Name
Input
State
Description
16 AT Analog Input
Voltage/current
Select ON Terminal OI is enabled for current input (uses
terminal L for power supply return)
OFF Terminal O is enabled for voltage input (uses
terminal L for power supply return)
Valid for inputs:
C001, C002, C003, C004,
C005, C006
Required settings:
A001 = 01
Notes:
•
If the [AT] option is not assigned to any intelligent
input terminal, then inverter uses the algebraic sum
of both the voltage and current inputs for the
frequency command (and A001=01).
•
When using either the analog current and voltage
input terminal, make sure that the [AT] function is
allocated to an intelligent input terminal.
•
Be sure to set the frequency source setting
A001=01 to select the analog input terminals.
+ –
4-20 mA when AT= ON
0-10 V when AT= OFF
1 2 3 4 5 6 L PCS
12 11 L H O OI FM CM2
Example (default input configuration shown
for –FU models; –FE and –FR models require
input configuration—see page
3–45 ):
See I/O specs on page 4–6 .
AT