Hitachi PSC-A128WEB3, Руководство по эксплуатации

Страница: 74 / 76

72
P5416904
No. Event Items to be checked Action
32 When the screen
returns from the screen
saver, it is indicated in
dual screen.
Has the free memery capacity of
the PC decreased?
When the free memory capacity is small for
example, the screen display may be delayed.
In that case, close all the unnecessary
applications to increase the memory capacity.
33 The update of the
screen display is
delayed (such as
connecting while
button is depressed).
Has the free memory capacity of
the PC decreased?
When the free memory capacity is small for
example, the screen display may be delayed.
In that case, close all the unnecessary
applications to increase the memory capacity.
Check that there is no error
between the computer and this
unit connection.
Check if the LAN cable is wired correctly and if
the HUB and this unit power is turned ON.
34 An error occurred
while starting the
management
application.
There is a possibility that an error
occurred temporarily in Internet
Explorer.
Restart the management application.
35 A pop-up window
is displayed while
checking the
connection.
Check that there is no error
between the computer and this
unit connection.
Check if the LAN cable is wired correctly and if
the HUB and this unit power is turned ON.
36 The screen froze. Check that there is no error
between the computer and this
unit connection.
Check if the LAN cable is wired correctly and if
the HUB and this unit power is turned ON.
37 When application
starts, it is indicated in
dual screen.
Check the settings of Internet
Explorer.
Refer to page 11 (7) Enable Telenet Client.
38 The clock displayed
in Windows
®
does
not match with the
clock displayed in
the management
application.
Were the settings for DST and
time zone of Windows
®
modified
during start of the management
application?
Please, restart the management application.
39 Language setting
cannot be performed.
Display pop-up window [20 min
passed since “check connection”
started. ...]?
LAN communication may be interrupted when
Language setting is in progress.
Check if the LAN cable is wired correctly and if
the HUB and this unit power is turned ON.
Restart the management application without
clicking [Done], then perform again Language
setting.
40 This unit is restarting. It the network setting correct? After the unit starts, initialize the IP address by
following the initialization of IP Address setting
described in the installation manual while
7-segment LED is “C0”.
Then, perform the registration to the correct
network settings.