Chapter 5 Instruction Specifications
5-102
Item number
Control instructions-3
Name
Unconditional jump (JUMP)
Ladder format
Condition code
Processing time (
µ
s)
Remark
R7F4
R7F3
R7F2
R7F1
R7F0
Average Maximum
JMP n
DER
ERR
SD
V
C
z
1]
z
z
z
Instruction format
Number of steps
32
Condition
Steps
JMP n
2
Bit
Word
Double word
Usable I/O
X
Y
R,
M
TD, SS,
CU, CT
WX WY
WR,
WM TC DX DY
DR,
DM
C
o
nstant
Other
n
Code number
{
0 to 255 (Decimal)
Function
•
If the startup condition of JMP n switches on, the control jumps the program from this instruction to the LBL n of the same
code number. Always use JMP n and LBL n in pairs.
•
If the startup condition is not established, the next instruction will be executed.
•
To set this instruction in conjunction with other instructions in the same arithmetic-operation box, insert this instruction at
the end of the box.
•
The JMP n instruction is valid only within the same scan program. (A jump to a subroutine or interrupt scan cannot be
performed from a normal scan, nor vice versa.)
•
Nesting of JMP n instructions is possible, but note so that an overload error does not occur.
Notes
•
This instruction is checked prior to the execution, and if there is an error, the following error codes are set in the special
internal outputs R7F3 and WRF015. In this case, jump is not performed and the next instruction will be executed.
Special internal output
Error code
Error description
R7F3=1
WRF015
H0015
There is no LBL n.
H0040
A jump is attempted to a different program area.
Instruction for use
JMP n
LBL n
Program
Program
•
When the startup condition turns on, it jumps to LBL n.
•
If there is a timer within the program it jumped to, the progress value is updated,
but since instructions are not executed, output will not be turned on even if the
ON conditions are met.
JM
P n
Содержание HIDIC MICRO-EH
