Hitachi CE50-10, Инструкция по эксплуатации

Страница: 131 / 194

<Options>
• -h, --help
Displays the help message.
• -
p, --print
Displays the OS version and partition number of the system area to be started next (default).
• -s, --switch
Changes the system area to be started next. This setting takes effect on and after the next startup.
•
-e {2,3}, --enable {2,3}
Starts the partition of the specified partition number ( 2 or 3 ) the next time and later.
<Execution example>
• -s option
$ sudo rxosenable
OS(01-01 [01]) is enabled. (/dev/sda2)
$ sudo rxosenable -s
switch done
$ sudo rxosenable
OS(01-02 [01]) is enabled. (/dev/sda3)
$
•
-e
option
$ sudo rxosenable
OS(01-01 [01]) is enabled. (/dev/sda2)
$ sudo rxosenable -e 3
enable done
$ sudo rxosenable
OS(01-02 [01]) is enabled. (/dev/sda3)
$
•
-h
option
$ sudo rxosenable -help
usage: rxosenable [-h] [-p | -s | -e {2,3}]
optional arguments:
-h, --help show this help message and exit
-p, --print Print enabled-OS version(default)
-s, --switch Switch the active-partition
-e {2,3}, --enable {2,3}
Enable the partition 2/3
$
<Diagnosis>
For the exit code,
0
is returned if the status is normal and
1
is returned if an error is detected. Table 5‒32: List of
rxosenable command error messages below shows error messages that are output when an error is detected.
Table 5‒32: List of rxosenable command error messages
No. Error message Description
1 usage: rxosenable [-h] [-p | -
s | -e {2,3}] rxosenable:
error: unrecognized arguments:
xxx
The specified argument ( xxx ) is invalid.
2 usage: rxosenable [-h] [-p | -
s | -e {2,3}]rxosenable:
error: argument -e/--enable:
invalid choice:
XX (choose
from 2, 3)
The specified partition number ( XX ) is invalid. Specify 2 or 3.
5. Configuring Software Environment
115