Hitachi CE50-10, Инструкция по эксплуатации

Страница: 130 / 194

<Diagnosis>
For the exit code,
0
is returned if the status is normal and
1
is returned if an error is detected. Table 5‒31: List of
ecosupdate command error messages below shows error messages that are output when an error is detected.
Table 5‒31: List of ecosupdate command error messages
No. Error message Description
1 Usage:
/hitachi/bin/ecosupdate -h
/hitachi/bin/ecosupdate <dir>
The specified argument is invalid.
Revise the specified option, and then rerun the command.
2 ecosupdate: Directory not
found. The specified directory does not exist.
Revise the specified directory path, and then rerun the command.
3 ecosupdate: Extracting root
partition failed. An attempt to extract the OS update file to the root partition
failed.
Rerun the command.
4 ecosupdate: OSverinfo is not
found.
OSverinfo
was not found.
Store the file again, and then rerun the command.
5 ecosupdate: OSverinfo is
broken.
OSverinfo
is corrupted.
Store the file again, and then rerun the command.
6 ecosupdate:OS update file is
not found or broken. osprog_base.tar was not found or is corrupted.
Store the file again, and then rerun the command.
7 ecosupdate: Failed to save /
hitachi/etc/ecosupdate/
system<1|2>/boot.tgz An attempt to save the boot partition file failed.
Confirm that
/hitachi/etc/ecosupdate/
is writable, and
then rerun the command.
8 ecosupdate: Failed to save
root partition to /dev/sda<2|
3>. An attempt to save the root partition failed.
Rerun the command.
9 Backup for boot partition
failed. An attempt to back up the boot partition failed.
Confirm that
/hitachi/etc/ecosupdate/
is writable, and
then rerun the command.
10
ecosupdate: ecosupdate needs
root privilege. Try 'sudo
ecosupdate'.
Running the command requires root privileges.
Use
sudo
.
11
ecosupdate: OS update failed.
Please re-try.
Processing of the ecosupdate command did not finish. The
active area of the OS has not been changed.
Eliminate the cause of the error, and then rerun the command.
12 ecosupdate: system,error. OS
update failed. Processing did not finish due to an unknown error.
Restarting the OS might cause it to be unable to start.
Eliminate the cause of the error, and then rerun the command.
5.18.6 rxosenable
<Name>
rxosenable
- Change the active OS area.
<Format>
rxosenable [-h] [-p | -s | -e {2,3}]
<Description>
This command changes the system area to be started next.
5. Configuring Software Environment
114