Hitachi CE50-10, Инструкция по эксплуатации

Страница: 128 / 194

Item Display Description
(g)
Finished: 20210525101010_sda8_0
1.gz
Finished: 20210525101010_etc_01
.tgz
This message indicates that restoration of the relevant
backup files finished normally.
Messages (c) through (g) are displayed for all the files in
the specified directory.
(h)
Successfully completed
This message indicates that restoration of all backup files
finished normally.
4. To restore data from the maintenance PC, enter
2
, and then press the Enter key.
This selects restoration from the maintenance PC, and then the following screen appears.
Making partitions finished. ...(a)
OK
Restoring from maintenance PC. ...(i)
Please send 20210525101010_sda8_01.gzto /mnt/ecbackup_data/. Finished? (y)...(j)
Restoring: 20210525101010_sda8_01.gz (start=0 size=123456) ...(c)
31MiB 0:00:01 [16.1MiB/s] [====> ] 25% ETA 0:00:02 ...(d)
Will you verify restored area(y / N)?y ...(e)
Verifying: 20210525101010_sda8_01.gz (start=0 size=123456) ...(e)
The file and the partition doesn't match. Retry?(y / N) ...(f)
Restoring: 20210525101010_sda8_01.gz (start=0 size=123456) ...(c)
31MiB 0:00:01 [16.1MiB/s] [====> ] 25% ETA 0:00:02 ...(d)
Finished: 20210525101010_sda8_01.gz ...(g)
(snip)
Will you verify restored directory(y / N)? ...(e)
Verifying: 20210525101010_sda8_01.gz (start=0 size=123456) ...(e)
The file and the directory doesn't match. Retry?(y / N) ...(f)
Finished: 20210525101010_etc_01.tgz ...(g)
Successfully completed ...(h)
$
Table 5‒29: Description of the screen after restoration from the maintenance PC started
Item Display Description
(a) to
(h) See Table 5‒28: Description of the screen after
restoration from external media started. See Table 5‒28: Description of the screen after
restoration from external media started.
(i)
Restoring from maintenance PC.
This message indicates that restoration from the
maintenance PC started.
(j)
Please send 20210525101010_sda8_01
.gzto /mnt/ecbackup_data/. Finish
ed? (y)
This message asks you to transfer the backup file.
When this message appears, place the specified backup
file in
/mnt/ecbackup_data
. After placing the
file, enter
y
, and then press the Enter key to go to the
next display.
5. Enter
q
, and then press the Enter key:
The
ecrestore
command terminates.
If you enter any other data, the prompt character (
>
) appears and the system waits for you to enter information
again.
For details about running the command, see 5.15.4 Restoring backup data.
<Diagnosis>
For the exit code,
0
is returned if the status is normal and
1
is returned if an error is detected. Table 5‒30: List of
ecrestore command error messages below shows error messages that are output when an error is detected.
Table 5‒30: List of ecrestore command error messages
No. Error message Description Action
1 Restore failed. Restoration failed due to an error. Eliminate the cause of the error by
referring to other error messages,
and then rerun the command.
5. Configuring Software Environment
112