Hioki SW9001, Инструкция по эксплуатации

Страница: 95 / 170

91
Message Reference
Standard commands
(1) System data command
Query device ID (ID code)
Syntax Query
*IDN?
Response <Manufacturer name>,<Model name>,<Serial No.>,<Software version>
Example
*IDN?
HIOKI,SW1001,123456789,V1.00
For the SW1002, the <Model name> is “SW1002”.
(2) Internal operation commands
Initializes the device.
Syntax Command
*RST
Description
Resets the device to its initial state.
See: "6.1 Initialization Settings" (p. 47)
Note • The communication conditions are not initialized.
•All closed channels are opened.
• Initialized settings are not preserved when the power is turned off. To save initialized
settings, execute the
SYSTem:BACKup
command.
See: "Backing up settings" (p. 105)
Initiates a self-test and queries the result.
Syntax Query
*TST?
Response <PASS/FAIL>
Description
Performs the device self-test and returns the result.
Returns PASS when no error occurs and FAIL when an error occurs.
Example
*TST?
PASS
A self-test was executed and no error occurred.
Note An execution error occurs during scan operation.
Trigger
Syntax
Command
*TRG
Description Starts scan operation when the scan list is enabled. During scan operation, switches to
the next channel as specified by the registered scan list.
Example
*TRG
During scan operation, switches to the next channel as specified by the registered scan
list.
8
Communication Function
HIOKI SW1001A961-04