Hioki SW9001, Инструкция по эксплуатации

Страница: 87 / 170

83
Communication Method
Standard Operation Register
Bit 15 – Unused
Bit 14 – Unused
Bit 13 ERR
Set to “1” when an error occurs (cleared when details are acquired from
:SYSTem.ERRor?
).
Bit 12 – Unused
Bit 11 CLOSE Set to “1” when channel closing is completed.
Bit 10 REMOTE Set to “1” when the device is in the remote state.
Bit 9 – Unused
Bit 8 – Unused
Bit 7 – Unused
Bit 6 – Unused
Bit 5 WAIT_TRG Set to “1” when the device is in the trigger waiting state.
Bit 4 SCAN Set to “1” when scan is operating.
Bit 3 – Unused
Bit 2 – Unused
Bit 1 – Unused
Bit 0 – Unused
Event Register of the Standard Operation Register Group (
:STATus:OPERation:EVENt?
) and
Enable Register of the Standard Operation Register Group (
:STATus:OPERation:ENABle
)
Status Byte Register (STB)
bit 7 bit 6 bit 5
ESB1
SRQ/
MSS
MAV
Event Register of the Standard Operation Register Group
(
:STATus:OPERation:EVENt?
)
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
– – ERR –
CLOSE
REMOTE – – – –
WAIT
_TRG
SCAN – – – –
Logical sum & & & & & & & & & & & & & & & &
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
– – ERR –
CLOSE
REMOTE – – – –
WAIT
_TRG
SCAN – – – –
Enable Register of the Standard Operation Register Group
(
:STATus:OPERation:ENABle
)
8
Communication Function
HIOKI SW1001A961-04