Hioki MR8880-20, Инструкция по эксплуатации

Страница: 160 / 300

6.2 Saving Data
150
Basically, three methods are available for saving.
6.2 Saving Data
Before saving, select the
items to be saved on the
[Sys-
tem] screen. These are saved
immediately when you press
SAVE . This is convenient for
saving certain types of data, or
when you want to save imme-
diately while monitoring.
(default setting)
Press SAVE to select and
save the selected contents.
No settings are needed be-
fore saving this way.
Set this before starting mea-
surement.
The operation differs depend-
ing on the function (p. 68).
The measurement data is
saved automatically after
measurement starts.
Auto Save (p. 102) Quick Save (p. 154) Select & Save (p. 152)
Insert a removable
storage (p. 46)
Set the Auto Save
(p. 102)
Select what to save
Measurement
Auto save
• [Highspeed]: Data is saved
automatically after the
waveform is acquired.
• [Realtime]: Data is saved
automatically while the
waveform is acquired.
The calculation result is
saved automatically
when measurement ends.
• Waveform Data
• Numerical Calculation
Results
Insert a removable
storage (p. 46)
Set the function of SAVE
to [Quick Save]
Select what to save
Press SAVE after
measuring
Save
• Waveform Data
• Screen Image
• Setting Data
• Numerical Calculation
Results
Insert a removable
storage (p. 46)
Set the function of SAVE
to [Select & Save]
Press SAVE after
measuring
Select what to save.
Press ENTER
Save
Save Dialog
• Waveform Data
• Screen Image
• Setting Data
• Numerical Calculation
Results
• Schedule Settings
To save automatically
while measuring
To save immediately
upon pressing the SAVE
To save selected
contents