46
Registering a Waveform
7.2 Registering a Waveform
This section describes how to register the desired waveform data in the U8793’s memory. You can
register either data created using the SF8000 Waveform Maker or data measured with a Memory
HiCorder. For more information about how to create waveforms with the SF8000 Waveform Maker,
see 13 Waveform Maker (p.85).
1
2
Information about
registered data
1
Select the setting under
[Type]
.
2
Press a function key (
F1
to
F5
) or select a button with the mouse.
Register:
From File
Registers data saved on external media. (p.49)
Register:
From Meas.
Registers data measured using the memory function. The data can be
registered once the MEM le is loaded into the Memory HiCorder from
external media. (p.47)
Delete
Deletes data that has been registered in the U8793’s memory. If the
maximum eight waveforms have already been registered, you must delete
one of the previously registered waveforms before you can register a new
waveform.
Data for up to eight arbitrary waveforms can be registered for each channel.
If deleted arbitrary waveform data is used in program function (p.59) steps, those steps will
also be deleted.
www.
.com
1.800.561.8187
