38
Setting the Pattern Mode
Setting the clock frequency
1
2
1
Select the
[Clock Freq]
setting.
2
Press a function key (
F1
to
F5
) or select a button with the mouse.
Up-Down
p.18
Tenkey entry
p.19
Period
Allows you to enter the setting as a period instead of a frequency. This value
can be set only by means of numeric keypad input. (p.19)
Valid clock frequency setting range: 0 Hz to 120 kHz (in 10 Hz increments)
Valid clock period setting range: 0 sec. to 0.1 sec.
The clock period can be set as desired within the above range. However, the clock period of the
waveform that is actually output will be the clock period of the waveform corresponding to the
valid clock frequency setting that would produce the clock period closest to the user-entered
clock period value.
www.
.com
1.800.561.8187
