114
Interpolation Input Mode
Editing mode
Select the operation to perform when the mouse button is clicked.
Select
[Edit Mode]
on the menu bar or select the operation on the toolbar.
Select
Select the range over which to interpolate between dots.
Left button click: Selects the start position. A vertical broken line will be displayed at the clicked position.
Right button click: Selects the range. A vertical broken line will be displayed at the clicked position, which will
serve as the endpoint of the range.
The dots enclosed within the range de ned by the two vertical broken lines will be interpolated.
(Dots in excess of the waveform size will be treated as outside the scope of interpolation.)
Clicking the left button while the two vertical broken lines are displayed will cancel the selected range.
Dot input (default)
A dot will be entered at the position at which you click the left button. Up to 200 dots can be entered. In
dot input mode, the selected range will be canceled, and dots within the waveform size will be subject to
interpolation.
Dot data list
Data for the entered dots will be shown in the dot data list on the right side of the screen. The time-
axis position (number of points) and voltage value for each dot will be shown in the list.
You can change dot data values and add and delete dots in the list.
www.
.com
1.800.561.8187
