and “Epub”, the formatting will not be kept and will be saved as “TXT”
format.
However, if you created a new document by executing the word
processor or by executing “New,” and you execute “Save” or “Save As,”
the displayed default file name is “noname.brl” and the file path is
“flashdisk/My Documents/.”
If you want to edit the file name that is displayed on the Braille display,
press the cursor routing key where you want to edit the file name, and
then modify it. Or, if you want to make a new file name, type in the new
file name without pressing any of the cursor routing keys. You cannot
use the following characters in a file or folder name. “|, \, <, >, ?, :, *”
If you want to change the file format, move to “Type.” In “Type,” move to
the file format that you want by pressing “Space-1” or “Space-4.”
If you want to save a file with a file name that is in the file list, move to
the “file list” by pressing “shift-tab.”
Note: When saving the “rtf” and “doc”, the file formatting will be lost and
saved.
5.1.5 Close Current Document
The “Close Current Document” command allows you to close the current
document that you are working on without closing the word processor.
You can access the “Close Current Document” command by pressing
“Space-m (dots 1-3-4)” or “F2.” Then, press “Enter” on the “File” menu.
Use the up and down arrows (“Space-1” and “Space-4”) until you find
“Close Current Document,” and then press “Enter.” Or, you can press “q
(dots 1-2-3-4-5)” in the “File” menu. You can also access this function by
pressing “Space-q (dots 1-2-3-4-5)” while you are editing a document.
Please note that this function will not work if you only have one
document open. You must have at least two or more documents open in
order to execute the “Close Current Document” command.
