Hill-Rom P1830 Скачать руководство пользователя страница 76

Страница: 76 / 112

Options

TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System

User Manual (143434 REV 8)

Patient Helper

WARNING:

Do not remove or install the Patient Helper arm assembly when a patient is in the bed.

Patient injury or equipment damage could occur.

WARNING:

Use the Patient Helper (trapeze) in the center locked position only. Personal injury could

occur.

WARNING:

Failure to use the correct headboard on a bed with the Patient Helper option could cause

personal injury.

WARNING:

Failure to correctly attach the Patient Helper arm assembly could cause it to fall. Personal

injury or equipment damage could occur.

WARNING:

Do not exceed the SWL of the Patient Helper. Personal injury or equipment damage could

occur.

The Patient Helper arm assembly attaches to the trapeze support at the head end of the bed. The patient may use the
Patient Helper to help raise his or her upper body. The SWL of the Patient Helper is 250 lb (113 kg).

To Install:

1. At the head end of the bed, install the upright arm on the trapeze support

2. Pull the T-handle at the bottom of the upright arm, and turn the arm so it is toward the side of the bed

3. Install the horizontal arm on the upright arm.

4. Install the release pin to attach the horizontal arm to the upright arm.

5. Install the clamp of the trapeze handle assembly on the horizontal arm, and tighten the clamp to attach the

trapeze handle assembly to the horizontal arm.

6. Pull the T-handle at the bottom of the upright arm, and turn the arm until it locks into the center position

and the trapeze handle is over the center of the bed.

7. Make sure all parts of the Patient Helper arm assembly are correctly attached.

Содержание P1830

















































































































Результаты поиска

Содержание P1830

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P1830, Руководство пользователя

Результаты поиска

Содержание P1830

Отзывы:

Бренды по названию

Популярные бренды