Hill-Rom P1830, Руководство пользователя

Страница: 23 / 112

Features
TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System 15
User Manual (143434 REV 8)
NOTE:
For the TotalCare® Bariatric Plus Therapy System the patient deck slightly reclines backwards and the seat and lumbar
sections on the mattress deflate and then the patient deck transitions to the chair position (Cradle Transition).
4. When the system has reached the approximate desired position, release the Chair control. If desired, use
the Head, Knee, Foot, or Foot Retract Controls to make custom recliner position adjustments.
WARNING:
Do not transport a patient with the bed in a recliner position. Injury to the patient may occur.
WARNING:
Do not use ankle restraints when using this feature. Injury to the patient may occur.
WARNING:
The patient’s feet must be supported at all times while in the recliner position. Extended
periods of time without support can cause discomfort and reduced circulation. Injury to the
patient may result from improper positioning.
Nurse Call
On TotalCare® Bed Systems equipped with the Nurse Call option, use a NURSE control
to activate the Nurse Call feature. The controls are located on both the inboard and
outboard sides of the intermediate siderails.
To Activate:
• Press a NURSE control.
• When the nurse’s station acknowledges the nurse call, the indicator light on
the NURSE control will flash.
• When the nurse’s station communication line is open, the indicator stops
flashing and illuminates continuously.
• Speak into the speaker/microphone located on the inboard side of the head end siderails.
You do not need to press the Enable control prior to pressing a NURSE control. The NURSE controls are always
active. The NURSE controls cannot be locked out by the Master lockout control.
NOTE:
A nurse call is placed automatically one minute after the loss of AC power (only on beds built prior to January 2000).
Point-of-Care® Brake and Steer System
The Point-of-Care® Brake and Steer System pedal control is located above the casters at the head end of the system.
Use the steer mode to move the bed. Engaging the Brake feature keeps the bed from moving. The neutral position
allows the system to be moved sideways in a room or small enclosed area.