Hill-Rom P1830 Скачать руководство пользователя страница 69

Страница: 69 / 112

Features

TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System

User Manual (143434 REV 8)

To store the transport handles:

•

Grasp the handles, and lift upwards to unlock the
handles.

•

Swing the handles inward toward the center of the
bed into the stowed position.

WARNING:

In case of battery or motor power loss, press the

electronic brake switch to

OFF

to permit forward and

reverse bed movement with a deployed, unpowered,

IntelliDrive® Transport System.

WARNING:

If the bed propels forward or reverse when

depressing one of the enable switches and not

applying any pressure on either of the handles,

contact your local service personnel for repair.

Failure to do so can result in personal injury or

equipment damage.

WARNING:

If the bed propels forward or reverse while applying pressure on either of the transport

handles and not pressing either of the enable switches, contact your local service personnel

for repair. Failure to do so can result in personal injury or equipment damage.

WARNING:

If the bed is stopped on a ramp, or a patient is left unattended, set the brake to avoid

unwanted bed movement. Failure to do so can result in personal injury or equipment

damage.

WARNING:

Significantly reduce the speed of travel when powering the IntelliDrive® Transport System

when using freestanding patient attached equipment or traveling through doorways. Failure

to do so can result in personal injury or equipment damage.

CAUTION

The IntelliDrive® Transport System is intended for indoor use only. Outdoor use may cause
temporary or permanent damage to the powered drive mechanism and/or drive belt.

On/Off switch

Содержание P1830

















































































































Результаты поиска

Содержание P1830

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P1830, Руководство пользователя

Результаты поиска

Содержание P1830

Отзывы:

Бренды по названию

Популярные бренды