manualshive.com logo in svg

Hill-Rom P1830, Руководство пользователя

Поделиться
Скачать
Hill-Rom P1830 Скачать руководство пользователя страница 24

Features

16

TotalCare® Bariatric Bed and TotalCare® Bariatric Plus Therapy System 

User Manual (143434 REV 8)

To Activate:

When the brake and steer pedal is placed in steer, the front casters are 

not

 locked into steer mode. All four casters on 

the bed are put into the neutral position. This allows the bed to pivot on the IntelliDrive® Transport System drive wheel. 
Pivoting on the drive wheel allows for tighter turns, and enhanced ease of steering.

NOTE:

Use the transport handles at the head end of the bed to push the TotalCare® Bed System.

For beds with the IntelliDrive® Transport System installed, the brake and steer system operates differently. When the 
brake and steer pedal is placed in steer, the front casters are 

not

 locked into steer mode. All four casters on the bed 

are put into the neutral position. This allows the bed to pivot on the IntelliDrive® Transport System drive wheel. Pivoting 
on the drive wheel allows for tighter turns, and enhanced ease of steering.

When the bed is connected to AC power and the brakes are 

not

 set, an alarm sounds. When AC power is removed, 

the alarm will stop.

WARNING:

Unless transporting the patient, always set the brakes. Reconfirm that the brakes are set 

before any patient transfer. Failure to do so may cause personal injury or equipment 

damage.

Emergency Caregiver Foot Controls

An Emergency CPR and an Emergency Trendelenburg control pedal is located 
on each side of the base frame between the head end and foot end casters.

•Brakes-Step down on the orange Brake

Pedal. The 

Brake not Set 

indicator goes out,

indicating the four casters are locked. Push

and pull on the system to make sure that

the brake function is fully engaged.

•To Steer-Step down on the green Steer

Pedal. The 

Brake not Set 

indicator comes on.

•Neutral Position-Move the Brake/Steer

pedal to the level position. The 

Brake not Set

indicator comes on. The system can now be

moved in any direction.

If the bed is unplugged, the IntelliDrive®
Transport System will deploy.

Содержание P1830

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды