Hill-Rom CarePorter P3000, Руководство по обслуживанию

Страница: 40 / 220

Getting Started
Chapter 2: Troubleshooting Procedures
CarePorter™ Cart Service Manual (man239) Page 2 - 3
2
Getting Started
WARNING:
Only facility-authorized maintenance personnel should troubleshoot the
CarePorter™ Cart. Troubleshooting by unauthorized personnel could
result in personal injury or equipment damage.
Begin each procedure in this chapter with step 1. Follow the sequence outlined
(each step assumes the previous step has been completed). In each step, the
normal operation of the product can be confirmed by answering Yes or No to
the statement. Your response will lead to another step in the procedure, a repair
analysis procedure (RAP), or a component replacement. If more than one
component is listed, replace them in the given order.
Start with Initial Actions to begin gathering information about the problem.
Perform the Function Checks to isolate or identify a problem and to verify the
repair after completing each corrective action (replacing or adjusting a part,
seating a connector, etc.).
Perform the Final Actions after the Function Checks to verify the repair.
If troubleshooting procedures do not isolate the problem, call Hill-Rom
Technical Support at (800) 445-3720 for assistance.
Initial Actions
Use Initial Actions to gather information from operators concerning problems
with the CarePorter™ Cart. Note symptoms or other information concerning
the problem that the operator describes. This information helps identify the
probable cause.
1. Someone who can explain the problem is available.
Yes No
↓ →
Go to “Function Checks” on page 2-4.
2. Ask that person to demonstrate or explain the problem. The problem can be
duplicated.
Yes No
↓ →
Go to “Function Checks” on page 2-4.