Hill-Rom CarePorter P3000, Руководство по обслуживанию

Страница: 116 / 220

4.18 Air Manifold Assembly
Chapter 4: Removal, Replacement, and Adjustment Procedures
CarePorter™ Cart Service Manual (man239) Page 4 - 53
4
4.18 Air Manifold Assembly
Tools required: 5/32" hex key allen wrench
Removal
1. Place the On/Standby switch to the Standby position.
SHOCK HAZARD:
To minimize the risk of electrical shock or damage to equipment,
disconnect all electrical power to the CarePorter™ Cart before working
on it. Failure to do so could result in personal injury or equipment
damage.
2. Unplug the unit from its power source.
3. Disconnect the battery pack (refer to procedure 4.1).
4. Set the brake casters to the brake position.
WARNING:
Turn off and disconnect the medical air supply. A fire and explosion
hazard exists when performing cleaning and maintenance procedures
in an oxygen enriched environment. Failure to disconnect the medical
air supply could result in personal injury or equipment damage.
5. Turn off and disconnect the medical air supply when performing cleaning
and maintenance procedures.
6. Remove the medical air tanks from the CarePorter™ Cart.
7. Disconnect the air cable sensor from the air manifold assembly.
8. Disconnect the ventilator shelf hoses from the air manifold assembly.
9. Disconnect the wall air hose assembly from the DISS adapter on the air
manifold assembly.
10. Using the 5/32" hex key allen wrench, remove the two screws that secure
the air manifold assembly to the manifold mount weldment.
11. Remove the air manifold assembly from the CarePorter™ Cart.