DS-76xx-I2/xP/4S NVR UM
61
Figure 7-8 Advanced Record Settings
Record Audio
: Check the checkbox to enable or disable audio recording.
Pre-Record
: The time you set to record before the scheduled time or event. For example,
when an alarm triggers the recording at 10:00, and if you set the pre-record time as 5
seconds, the camera records at 9:59:55.
Post-Record
: The time you set to record after the event or the scheduled time. For example,
when an alarm triggered recording ends at 11:00, and if you set the post-record time as 5
seconds, it records till 11:00:05.
Expired Time
: The expired time is period for a recorded file to be kept in the HDD. When the
deadline is reached, the file will be deleted. If you set the expired time to 0, the file will not
be deleted. The actual keeping time for the file should be determined by the capacity of
the HDD.
Redundant Record/Capture
: By enabling redundant record or capture you save the record
and captured picture in the redundant HDD. See
Chapter Configure Redundant Recording
and Capture.
Stream Type
: Main stream and sub-stream are selectable for recording. When you select
sub-stream, you can record for a longer time with the same storage space.
4)
Click
OK
to save the settings.
Configure Recording Schedule
Set the record schedule, and then the camera automatically starts/stops recording according to the
configured schedule.
Before you start
Make sure you have installed the HDDs to the device or added the network disks before you want to
store the video files, pictures and log files.
Refer to the
Quick Start Guide for the HDD installation.
Refer to
Chapter 7.1.2 Add the Network Disk for network HDD connections.
1)
Go to
Storage
>
Recording Schedule
.
2)
Select a camera.
