DS-76xx-I2/xP/4S NVR UM
128
Figure 16-9 SNMP Settings
2)
Check
Enable
. A message will pop up to prompt possible security risk and click
Yes
to continue.
3)
Configure the SNMP settings as needed.
Trap Address
: IP address of the SNMP host.
Trap Port
: Port of the SNMP host.
4)
Click
Apply
.
Configure E-mail
Purpose
The system can be configured to send an E-mail notification to all designated users when a specified
event occur, such as an alarm or motion event is detected, or the administrator password is changed,
etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server. The
network must also be connected to either an intranet or the Internet depending on the location of the
e-mail accounts to which you want to send notification.
1)
Go to
System
>
Network
>
Advanced
>
.
