HIKVISION DS-7200HVI Скачать руководство пользователя страница 98

Страница: 98 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

7.1.4 Backing up Video Clips

Purpose:

You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB

HDDs, USB writer), or SATA writer.

Steps:

Enter Playback interface.

Please refer to

Chapter 6

During playback, use buttons

and

in the playback toolbar to start or stop clipping record file(s).

Exit Playback interface after finishing clipping and you will then be prompted to save the clips.

Note:

A maximum of 30 clips can be selected for each channel.

Figure 7.18 Interface of Playback by Time

Click

Yes

to save video clips and enter Export interface, or click

to quit and do not save video clips.

Figure 7.19 Attention to Video Clip Saving

Export the video clips.

Click

Export

button and start backing up.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 98 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: