HIKVISION DS-7200HVI Скачать руководство пользователя страница 123

Страница: 123 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

122

Figure 9.24

Email Settings Interface

Configure the following Email settings:

Enable Server Authentication (optional):

Check the checkbox to enable the server authentication

feature.

User Name

: The user account of sender’s Email for SMTP server authentication.

Password

: The password of sender’s Email for SMTP server authentication.

SMTP Server:

The SMTP Server IP address or host name (e.g., smtp.263xmail.com).

SMTP Port:

The SMTP port. The default TCP/IP port used for SMTP is 25.

Enable SSL (optional):

Click the checkbox to enable SSL if required by the SMTP server.

Sender:

The name of sender.

Sender’s Address:

The

Email address of sender.

Select Receivers:

Select the receiver. Up to 3 receivers can be configured.

Receiver:

The name of user to be notified.

Receiver’s Address:

The Email address of user to be notified.

Enable Attached Pictures:

Check the checkbox of

Enable Attached Picture

if you want to send

email with attached alarm images.

Interval:

The interval refers to the time between two actions of sending attached pictures.

Figure 9.25 Configure Email Settings

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 123 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: