HIKVISION DS-7200HVI Скачать руководство пользователя страница 134

Страница: 134 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

133

Enter the NetHDD IP address in the text field.

Enter the NetHDD Directory in the text field.

Click the

button to add the configured NAS disk.

Note:

Up to 8 NAS disks can be added.

Figure 10.7 Add NAS Disk

•

Add IP SAN:

Enter the NetHDD IP address in the text field.

Click the

Search

button to the available IP SAN disks.

Select the IP SAN disk from the list shown below.

Click the

button to add the selected IP SAN disk.

Note:

Up to 1 IP SAN disk can be added.

Figure 10. 8 Add IP SAN Disk

After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The

added NetHDD will be displayed in the list.

Note:

If the added NetHDD is uninitialized, please select it and click the

Init

button for initialization.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 134 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: