HIKVISION DS-7200HVI Скачать руководство пользователя страница 4

Страница: 4 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present:

Special measures and precautions must be

taken when using this device. Some potentials (voltages) on the device may present a

hazard to the user. This device should only be used by the Employees from our company

with knowledge and training in working with these types of devices that contain live circuits.

Power Supply Hazardous Voltage:

AC mains voltages are present within the power supply assembly.

This device must be connected to a UL approved, completely enclosed power supply, of the proper rated voltage

and current.

No user serviceable parts inside the power supply.

System Grounding (Earthing):

To avoid shock, ensure that all AC wiring is not exposed and that the

earth grounding is maintained. Ensure that any equipment to which this device will be attached is also connected

to properly wired grounded receptacles and are approved medical devices.

Power Connect and Disconnect:

The AC power supply cord is the main

disconnect device to mains (AC power).The socket outlet shall be installed near the

equipment and shall be readily accessible.

Installation and Maintenance:

Do not connect/disconnect any cables to or perform

installation/maintenance on this device during an electrical storm.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 4 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: