HIKVISION DS-7200HVI Скачать руководство пользователя страница 146

Страница: 146 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

145

Click the

button to finish the Copy settings and back to the OSD Configuration interface.

Click the

Apply

button to apply the settings.

Note:

You can also click the

Restore

to restore the current OSD settings to the default parameters.

11.2 Configuring Privacy Mask

Purpose:

You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator.

Steps:

Enter the Privacy Mask Settings interface.

Menu > Camera > Privacy Mask

Select the camera to set privacy mask.

Click the checkbox of

Enable Privacy Mask

to enable this feature.

Figure 11.3 Privacy Mask Settings Interface

Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.

Note:

Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.

The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear

Zone1-4 icons on the right side of the window, or click

Clear All

to clear all zones.

Figure 11.4 Set Privacy Mask Area

You can click the

Copy

button to copy the privacy mask settings of the current camera to other cameras.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 146 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: