HIKVISION DS-7200HVI Скачать руководство пользователя страница 122

Страница: 122 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

121

Figure 9.22 Host/Others Settings Menu

Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP

Port is 80, and you can change them according to different requirements.

Click the

Apply

button to save and exit the interface.

Note:

The Server Port should be set to the range of 2000-65535 and it is used for remote client software access.

The HTTP port is used for remote IE access.

9.2.10 Configuring Email

Purpose:

The system can be configured to send an Email notification to all designated users if an alarm event is detected,

a motion detection event is detected, etc.

Before configuring the Email settings, the device must be connected to a local area network (LAN) that

maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet

depending on the location of the e-mail accounts to which you want to send notification.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network

Settings menu.

Figure 9.23

Network Settings Interface

Click

the

Apply

button to save the settings.

Select the

Email

tab to enter the Email Settings interface.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 122 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: