HIKVISION DS-7200HVI Скачать руководство пользователя страница 50

Страница: 50 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

Figure 5.3 Encoding Parameters-Main Stream

Set encoding parameters for main stream

Select

Record

to enter the main stream settings interface.

Select the camera for configuration.

Configure the following parameters for the Main Stream (Normal) and the Main Stream (Event):

•

Stream Type:

Set the stream type to be Video or Video & Audio.

•

Resolution:

Set recording at resolution of 4CIF, 2CIF, CIF or QCIF selectable.

•

Bitrate Type:

Set the bitrate type to be Variable or Constant.

•

Video Quality:

Set the video quality of recording, with 6 levels configurable.

•

Frame Rate:

Set the frame rate of recording.

•

Max. Bitrate Mode:

Set the mode to General or Customize (32-3072).

•

Max Bitrate (Kbps):

Select or customize the maximum bit rate for recording.

•

Max. Bitrate Range Recommended:

A recommended Max. bitrate range is provided for

reference.

Configure the pre-record, post-record time, expired time, redundant record (this option is only

available when the HDD mode is

Group

) and whether you want to record audio.

•

Pre-record:

The time you set to record before the scheduled time or event. For example, when

an alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera

records it at 9:59:55.

•

Post-record:

The time you set to record after the event or the scheduled time. For example,

when an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds,

it records till 11:00:05.

•

Expired Time:

The expired time is the longest time for a record file to be kept in the HDD, if

the deadline is reached, the file will be deleted. You can set the expired time to 0, and then the

file will not be deleted. The actual keeping time for the file should be determined by the capacity

of the HDD.

•

Redundant Record:

Enabling redundant record means you save the record files in the

redundant HDD. See

Chapter 5.8 Configuring Redundant Record

•

Record Audio:

Check the checkbox to record the sound, or uncheck to record the image without

sound.

ote:

The

Redundant Record

option is only available when the HDD mode is

Group.

The

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 50 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: