HIKVISION DS-7200HVI Скачать руководство пользователя страница 96

Страница: 96 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

Figure 7.13 Result of Event Search

Select record files to export.



Select motion detection event (s) from the list and click

Quick Export

button to enter the Export

interface, as shown in Figure 7.15.



(1) Click the

Details

button to enter the interface with detailed information of the record file, e.g.,

start time, end time, file size, etc.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

(2) Select record file (s) from the list and click

Export

button to enter the Export interface, as shown

in Figure 7.15.

Figure 7.14 Event Details Interface

Export the selected record files.

Click the

Export

button and start backing up.

Note:

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 96 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: