HIKVISION DS-7200HVI Скачать руководство пользователя страница 154

Страница: 154 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

153

Figure 12.9 Export Log Files

Select the backup device from the dropdown list of

Device Name

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button

to format the backup device before log export.

Note:

Please connect the backup device to device before operating log export.

The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logBack.txt

12.3 Importing/Exporting Configuration Files

Purpose:

The configuration files of the device can be exported to local device for backup; and the configuration files of one

device can be imported to multiple device devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance > Import/Export

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 154 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: