High End Systems DLHD High Definition Digital Light, Руководство пользователя

Страница: 31 / 318

CHAPTER 2
Setup and Configuration
DLHD Digital Light User Manual 9
Mounting the Fixture Upright
To mount the fixture upright, place the fixture on a sturdy, stable surface that will support more
than the
63.5 kg (140 lb) weight of the DLHD fixture. If the surface is above floor height, use
safety cables to secure the fixture to the surface.
Truss Mounting
When mounting the fixture on a truss or another type of support:
• Verify the truss or support will handle the combined weight of all the devices on the truss.
• Always mount the DLHD fixture with the mounting bracket assembly that shipped with your
fixture and a safety cable attached (using the mounting bracket) to the fixture’s base.
Use the following steps to mount a DLHD fixture on a standard truss:
1. Due to its size and
weight, at least two
people should support
the fixture. Always
stand on a firm, stable
surface when mounting
a fixture to its support.
2. Mount the clamps that
shipped with fixture to
the mounting brackets
and then attach the two
mounting brackets to
the base of the fixture
using the provided
quarter-turn screws.
CAUTION!
Do not mount the fixture upright without the four rubber feet
attached.
WARNING!
Before mounting, disconnect power to the fixture. If it has been
operating, allow the fixture to cool for five minutes before handling.
CAUTION!
Do not use C- Clamps to mount the DLHD fixture to truss.
Safety
cable loop
Bracket screw holes