High End Systems DLHD High Definition Digital Light, Руководство пользователя

Страница: 36 / 318

CHAPTER 2
Setup and Configuration
14 DLHD Digital Light User Manual
Software Setup
Software setup for DLHD fixtures requires the following steps:
1. After powering on the DLHD media server, launch the CMA software.
2. Check the software version installed and upgrade if necessary.
3. Configure the DLHD fixture’s DMX source, DMX protocol, and DMX Start Channel.
Installing and Launching the Content Management Application (CMA)
The Content Management Application software that shipped on CD with your fixture communi-
cates remotely with all DLHD, DL.2 and Axon media servers over an Ethernet network to:
• Upload and download custom digital content to fixtures
• Remotely control all menu commands
• Update software
Axon media servers can run the CMA directly. If your fixture network is linking DL.3 and DLHD
fixtures only, you will need to run the CMA on a computer connected to the Ethernet link you
have established.
The following are the minimum hardware requirements for a remote computer running the
CMA:
• Windows XP, Vista, Windows 7 (32 and 64 bit)
• Microsoft Framework 2.0 or later
• 100/1000 base Ethernet card (a Gigabit Ethernet card is recommended for fast content
uploading of large files)
After setting up an Ethernet network and linking all DLHD fixtures and your computer, insert the
CD that shipped with your fixture to automatically install the CMA on your hard drive.
For more information on CMA operation, see Chapter 16: Content Management Application
(CMA) on page 249.
NOTE: If the CMA doesn’t automatically launch, navigate to the
CMA.msi
file
in your Windows browser and double click to launch.
When you launch the CMA, it automatically finds and identifies all DLHD, DL.3 fixtures and Axon
media servers connected to the fixture link.