High End Systems DLHD High Definition Digital Light, Руководство пользователя

Страница: 267 / 318

CHAPTER 16
CMA: Warp Editor
DLHD Digital Light User Manual 245
Manipulating the Mesh Display
Once a warp mesh has been selected or a new warp created, you can use the mouse to:
• Orient the mesh shape within the viewing area of the screen
— Move the scroll wheel of the mouse to zoom in and out on the display area.
— Hold down the SHIFT key and move the scroll wheel to position the display up and down.
— Hold down the CNTR key and move the scroll wheel to position the display right and left.
• Select one or more control points by holding down the left mouse button and dragging over
the points you want to manipulate. The selection will 'Latch' to the control point
• De-select the point when you are finished editing it, using the Right Mouse Button.
• Remove portions of the grid by right clicking on an individual triangle portion of the mesh
Editing Fields
This section describes the editing fields from the left panel of the Warp Editor screen in detail.
Geometry Editing Fields
Several primitive shapes in the drop down
field are available as a starting point for your
Warp file. The Geometry section of the
Editing bar lets you select and configure your
starting mesh.
Rectangular Grid
The default shape is a Retangular grid. Click
on New to establish a rectangular mesh.
Spline Rectangular Grid
After selecting the Spline Rectangular Grid, set
the number of Beziner Control Points for both
horizontal and vertical from 2 to 6. Set the
Bezier Grid Resolution to determine the
smoothness of the bezier curve. Then click
New to create the mesh.
Note: Once you click
New
, the number of Control Points and Grid Resolution
cannot be changed until you create another Spline Rectangular Grid.