High End Systems Cyberlight, Руководство пользователя

Страница: 83 / 147

3-16 Cyberlight User Manual
1. After allowing the fixture to cool as described on the previous page, turn the power switch OFF
and unplug the fixture.
2. With the fixture oriented bottom-side up, remove the center access door by sliding the two door
latches inward. Lift the door straight up, unhook the safety chain, and set the door aside. See
Figure 3-20.
Figure 3-20. View of the bottom of the Cyberlight fixture, where the access door
latches are located.
3. Remove the fixture’s lamp box access door by removing the six 5/32 inch allen head screws
securing it to the fixture as follows:
• Remove the four 5/32 inch allen head screws from the bottom of the rear panel as shown in
Figure 3-21.
Figure 3-21. Removing the rear panel screws allows you to access the Cyberlight
voltage selection jumpers.